Product Support

Get help with products

Stuck on how to use one of our products?
Not sure how to clean them?
Find all the useful support information right here.

LetsGo Portable Baby Bottle Warmer


LetsGo Portable Baby Bottle Warmer

Getting Started

Thanks for purchasing a Tommee Tippee LetsGo Portable Bottle Warmer. This product support page is here to help you learn how to use it, and to answer any questions you may have.

Parts Guide

  1. Lid
  2. Integrated stainless steel neck
  3. Silicone sealing ring
  4. On/Off and temperature selection
  5. USB cable charging port


Diagram of LetsGo warmer labeled 1 - 5

LetsGo Bottle Warmer How to Use

How to use your LetsGo Bottle Warmer

  1. Take a prepared baby bottle that requires warming, either breast milk from storage or formula milk made up as per manufacturer guidelines.
  2. Put the warmer upside down and screw on the baby bottle securely.
  3. Press the power button on the unit’s base for 2 seconds.
  4. Select a temperature by single clicking through the options on the digital display.
  5. The warmer will then start to heat automatically, it will beep when he desired temperature has been achieved.
  6. The warmer will now keep the milk at the chosen temperature.
  7. Turn the unit so that the bottle’s base is flat on the surface and unscrew the warmer from the bottle. Remember to always check the milk’s temperature before feeding.
  8. Finally, press and hold the power button for 2 seconds to turn the unit off.


Diagram of LetsGo warmer steps 1- 4 how to useDiagram of LetsGo warmer steps 5- 8 how to use


How to Clean

How to clean your LetsGo Bottle Warmer

To keep it in good working order, please clean your LetsGo unit regularly following the simple instructions below…

  • Unplug the USB cable.
  • Ensure product is switched off and cool.
  • Remove the silicone ring and the adapter.
  • Wipe clean with a damp cloth or use a Tommee Tippee teat and bottle brush for hard-to-reach areas.

Remember... 

  • Clean all surfaces that the bottle warmer will touch using antibacterial wipes before each use.
  • Do not clean the unit with abrasive cleaners.
  • Do not immerse the LetsGo in water.

Troubleshooting

Can I sterilise my LetsGo Bottle Warmer?

You can sterilise the white plastic connector rings, but the heat plate and electrical unit itself cannot be sterilised. To clean the unit, we recommend that you follow the instructions above to remove any milk residue, and then wipe thoroughly with an anti-bacterial wipe.

How to descale your LetsGo Bottle Warmer

We recommend you descale the product daily according to the guidelines below to ensure that it continues to work efficiently…

  • Turn off the unit and allow to cool before descaling, wipe with a damp cloth only.
  • Use a descaler that’s suitable for use with stainless steel i.e., coffee or iron descaler and use as per the manufacturer's guidelines. Or you can use white vinegar or a descaling sachet to descale your unit.
  • Please use as per manufacturer's guidelines. Where no method is stated, use 15ml of white vinegar and 15ml water.
  • After descaling wipe the unit clean and use mild liquid soap to clean the heat plate.

Which other brands is the LetsGo compatible with?

The Tommee Tippee LetsGo Bottle Warmer is compatible with Tommee Tippee, MAM® and Philips Avent® bottles. For MAM® and Tommee Tippee bottles use the adapters provided, for Philips Avent® screw the bottle directly to the warmer.

Do not use the LetsGo to warm glass bottles.

Diagram of MAM and Tommee Tippee adaptor

How long does it take to heat milk in the LetsGo?

Bottle size

Heating from chilled to body temperature

Heating from room temperature to body temperature

90ml

7 mins

4 mins

150ml

10 mins

7 mins

260ml

25 mins

12 mins

How long will the milk stay warm in the LetsGo once it’s heated?

The LetsGo can keep milk warm for 4 hours on one charge based on a 260ml bottle.

Battery Power Instructions

  1. Battery Power Display: When the unit is turned off, press the On/Off button to see the its current battery power level. When it shows ‘100’, it’s fully charged and 100% power is available.
  2. Low Power Display under working state: ‘Lo’ will blink on the unit’s digital display for 6 seconds to warn you that the battery level is below 20%. When this shows, please charge your LetsGo unit.

The LetsGo's battery takes 4 hours to charge fully, and you can get 7 uses out of each charge (based on warming a 150ml bottle from room to body temperature).

WARNING!

  • Before plugging in the Bottle Warmer for the first time, please ensure that the voltage is compatible with your electricity supply by checking the label on the base of the unit.
  • Make sure the bottle is fitted correctly before switching the unit on.
  • Misuse of the product may result in the risk of fire, electric shock and/or personal injury.
  • Keep the appliance and its cord out of reach of children aged less than 3 years.
  • The heating element surface is subject to residual heat after use.
  • Ensure that the heating guidelines are followed to ensure that the bottle’s contents are not heated for too long.
  • For your child's safety always check the milk’s temperature before feeding.
  • Always use on a flat heat resistant surface.
  • It is recommended that the cord be kept as short as possible.
  • If the supply cord is damaged it must be changed by a qualified person to avoid a hazard.
  • If the damage is from new the unit must be returned to the manufacturer.
  • If within a retail warranty period, this product should be exchanged at place of purchase. The manufacturer will then be made aware.



DO NOT…

  • Use any accessories other than those supplied with this appliance.
  • Move the LetsGo when it’s in use.
  • Let the cord hang over edge of kitchen work surface or touch hot surfaces.
  • Operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
  • Touch hot surfaces.
  • Immerse the cord, plugs or other parts of the unit in water or other liquid.